Attention

1. Before installing the tailgate, check the status of the original tailgate. (Whether the gap in the door is balanced)

2. All images in the manual are for reference only. Pictures may not be the same as the real one, but the installation method is the same.

3. In order to facilitate your installation, please ca refullyread the product manual before installation. Please pay attention to protect the surface of your car to avoids cratches. Please regularly check all parts connected withthe car for looseness, to ensure the safety of use.

4. After the tailgate is installed, must learn settings to openand close the door.

5. Raise the tailgate to the top, and then press the tailgate switch button for 3-5 seconds. When you hear a sound"Di——", loose your hand. Finally, press the tailgate switch button again, you will hear "DiDi——" when the door was closed. Setting finished. If you don't have hear"DiDi——", setting is not succeed and you need to set again.

Installation Instruction

1.Remove the original car spring.

2.Install our ball head, install the electric hole (pictured).

3.Install the electric hole with the original car bracket.

4.Keep the original car electric pole.

5.Electric hole installation complete diagram.

6.Remove the original car 30A fuse plug, plug our power plug.

7.Earth wire connection.

8.Pull the plug of the original door lock position to the plug of three outlets of our company.

9.Remove the original car lock, install our electric suction lock.

10.Lock the lock rope on the motor, tighten the screws on both sides, and fix it with our screws and washers.

11.Fix it with original motor screws and tighten the screws with a wrench.

12.Connect the plug of our electric suction line with the motor socket.

13.Paste our 3M adhesive on the back of the motor

14.Motor installation position.

15.The Holzer cable, the power cable, the electric suction cable plug according to the color one pair of inserts the control box.

16.Central control box installation position.

17.After the tailgate trim plate hole installation switch button.
After the installation is complete, you must set the tailgate learning. Make sure that the door can be turned on and off.