Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
Company News
Dongguan Kaimiao Electronic Technology Co., Ltd
Home News

The Installation of Benz

China Dongguan Kaimiao Electronic Technology Co., Ltd certification
China Dongguan Kaimiao Electronic Technology Co., Ltd certification
Hello, Florence. We have tested one tailgate on Hyundai Tucson. We found that the product quality is good

—— Bolkar

they products are the best in the market we have used other company. there back up service is professiona.l

—— Mr. Nolan

I'm Online Chat Now
Company News
The Installation of Benz
Latest company news about The Installation of Benz

Attention

 

1. Before installing the tailgate, check the status of the original tailgate. (Whether the gap in the door is balanced)

 

2. All images in the manual are for reference only. Pictures may not be the same as the real one, but the installation method is the same.

 

3. In order to facilitate your installation, please ca refullyread the product manual before installation. Please pay attention to protect the surface of your car to avoids cratches. Please regularly check all parts connected withthe car for looseness, to ensure the safety of use.

 

4. After the tailgate is installed, must learn settings to openand close the door.

 

5. Raise the tailgate to the top, and then press the tailgate switch button for 3-5 seconds. When you hear a sound"Di——", loose your hand. Finally, press the tailgate switch button again, you will hear "DiDi——" when the door was closed. Setting finished. If you don't have hear"DiDi——", setting is not succeed and you need to set again.

 

Installation Instruction

 

1.Remove the button on the warning sign and remove the warning sign.

 

latest company news about The Installation of Benz  0

 

2.Remove the button from the plaque and remove the plaque (same as the left and right steps).

 

latest company news about The Installation of Benz  1

 

3.Remove the buttons on the plaque as shown in the illustration and remove the plaque.

 

latest company news about The Installation of Benz  2

 

4.Remove the right plaque.

 

latest company news about The Installation of Benz  3

 

5.Remove the original car spring, install our bracket, use our screws to fix the stent.

 

latest company news about The Installation of Benz  4

 

6.Install our company electric pole.

 

latest company news about The Installation of Benz  5

 

7.Install our company's rear bracket and install our company's electric pole.

 

latest company news about The Installation of Benz  6

 

8.Find the earth wire below the brace and connect the earth wire.

 

latest company news about The Installation of Benz  7

 

9.Unscrew the plaque and find the power.

 

latest company news about The Installation of Benz  8

 

10.Unplug the original car 30A power supply fuse.

 

latest company news about The Installation of Benz  9

 

11.Plug in our power plug.

 

latest company news about The Installation of Benz  10

 

12.Cut the two cables of the headlights (Note: Cut them separately, not together).

 

latest company news about The Installation of Benz  11

 

13.Lights wiring, the latter two pieces of tape are separately wrapped with tape.

 

latest company news about The Installation of Benz  12

 

14.The lights are directed along the yellow arrow to the control box.

 

latest company news about The Installation of Benz  13

 

15.Connect the original vehicle unlocking line and the in-place line respectively to the unlocking line and the in-position line of our switch wiring harness (the follow-up is directly connected with the three-way adaptor socket provided by our company, avoiding the need for trimming).

 

latest company news about The Installation of Benz  14

 

latest company news about The Installation of Benz  15

 

latest company news about The Installation of Benz  16

 

16.Cut the two lights on the right plaque.

 

latest company news about The Installation of Benz  17

 

17.Car light wiring.

 

latest company news about The Installation of Benz  18

 

18.Remove the original car lock, install our electric suction lock, use our screws to fix.
Lock the lock rope on the motor, tighten the screws on both sides, and fix it with our screws and washers.

 

latest company news about The Installation of Benz  19

 

19.The installation position of the motor and the control box, the Hall line, the electric suction line, the power line plug according to the color of a pair of plug-in control box.

 

latest company news about The Installation of Benz  20

 

20.Connect the plug of our electric suction line with the motor socket.
Install our company tailgate button switch, use the original car button to fix.
After the installation is complete, you must set the tailgate learning. Make sure that the door can be turned on and off.

 

latest company news about The Installation of Benz  21

Pub Time : 2018-04-20 10:56:27 >> News list
Contact Details
Dongguan Kaimiao Electronic Technology Co., Ltd

Contact Person: Mr. Carroll Chan

Tel: 13532848886

Fax: 86-0769-82198610

Send your inquiry directly to us (0 / 3000)