logo

Nissan Juke F16 2019-2024 Hands-Free Electric Power Tailgate Kit with Kick Sensor

Hands-free electric tailgate conversion for the Nissan Juke F16 2019 and newer. Kick sensor included, IP67 sealed struts and control unit, stored height memory, valet mode and a 90-minute bolt-on install.
Product Details
Highlight:

Nissan Juke electric tailgate kit

,

Hands-free power tailgate with kick sensor

,

F16 2019-2024 tailgate lift kit

Vehicle Model: Nissan Juke F16 2019 And Newer
Drive Layout: Twin Synchronised Electric Struts
Rated Voltage: 12V DC
Motor Type: Brushless DC Gear-damped
Standby Current: Under 3mA
Kick Sensor: Included, Hands-free Foot Trigger
Waterproof Rating: IP67
Noise Level: < 45dB / < 50 DB (Whisper-Quiet Operation
Opening Height: Adjustable With Memory
Valet Mode: Electric Function Can Be Disabled
Lifecycle: 120000 Open-close Cycles
Package Size: 78 X 22 X 15cm
Gross Weight: 5.8kg

Basic Properties

Place of Origin: Dongguan, Guangdong, China
Brand Name: Kaimiao
Certification: E-mark E24, CE, FCC, ROHS
Model Number: KMYL991

Trading Properties

Minimum Order Quantity: 1 Set
Price: USD 150-230 / Set
Payment Terms: T/T
Supply Ability: 3500 Sets per Month
Product Description

The second-generation Nissan Juke (F16, 2019 and newer) is a compact crossover with a heavy, wide-opening tailgate and a high load sill. Loading it one-handed is a common complaint: the tailgate is tall, the handle sits high, and in the rain the whole rear of the car gets wet while the driver wrestles the lid down. This hands-free electric power tailgate kit converts the manual tailgate into an automatic one, and with the included foot sensor the lid opens with a simple kick under the rear bumper, so shopping bags, dogs and children never have to be put down first.

Where this kit differs from generic retrofit sets is packaging density and installation time. The control unit is a compact sealed module that fits behind the factory trim without extra cutting, the two struts reuse the original ball studs, and the harness is pre-terminated with the connectors used on the F16 body. A trained installer completes the conversion in about 90 minutes, which makes it practical for accessory shops that bill by the hour.

Nissan Juke F16 2019-2024 Hands-Free Electric Power Tailgate Kit with Kick Sensor

What Is In The Box
  • Two electric lift struts with sealed ribbed housings and ball-joint ends
  • Compact control unit with integrated anti-pinch and speed control logic
  • F16-specific wiring harness with pre-crimped plugs
  • Hands-free foot (kick) sensor module with mounting clips
  • Tailgate button, brackets, bolts, cable ties and an English manual

Nissan Juke F16 2019-2024 Hands-Free Electric Power Tailgate Kit with Kick Sensor

Key Features
  • Hands-free kick sensor included: a short foot movement under the rear bumper opens or closes the tailgate when both hands are full.
  • IP67 sealed drivetrain: struts, sensor and control unit survive pressure washing, road salt and monsoon rain.
  • Compact packaging: the whole kit fits a 78 x 22 x 15cm carton at about 5.8kg, keeping courier and LCL costs low for dealers.
  • Two-way anti-pinch: closing reverses on obstacle contact, and opening stops if the lid meets a low ceiling or a roof box.
  • Height memory for tight spaces: store a lower opening position for basement car parks and home garages.
  • Selector switch for valet mode: the electric function can be disabled so the tailgate behaves like the standard manual lid.
  • Quiet brushless drive: measured below 45dB at one metre, so late-night openings do not disturb neighbours.

Nissan Juke F16 2019-2024 Hands-Free Electric Power Tailgate Kit with Kick Sensor

Technical Specifications
Item Data
Vehicle fitment Nissan Juke F16, 2019 and newer
Drive layout Twin electric struts, synchronised
Rated voltage 12V DC
Motor Brushless DC, gear-damped
Standby current Under 3mA
Waterproof rating IP67 (struts, ECU, kick sensor)
Operating temperature -40 C to +80 C
Noise level Below 45dB at 1m
Opening height Adjustable with memory
Obstacle response Reverse on closing, stop on opening
Cycle test 120,000 open-close cycles
Certification E-mark E24, CE, FCC, ROHS
Warranty 12 months
Fitment Notes

The kit is designed for left-hand drive and right-hand drive F16 bodies; please confirm the drive side when ordering, because the harness routing differs. Vehicles fitted with an aftermarket rear camera bracket or a tow bar may need a different sensor position, and our engineers will advise from a photo of the rear bumper. For facelift or hybrid variants, send the VIN and we will confirm the correct harness before shipment.

Nissan Juke F16 2019-2024 Hands-Free Electric Power Tailgate Kit with Kick Sensor

Applications

Ideal for urban drivers who park nose-in and load from the rear, parents folding strollers one-handed, dog owners, delivery and courier fleets working the Juke as a light cargo car, and accessory shops that want a quick-turn retrofit with a hands-free feature customers can test on the spot.

Packaging & Quality Assurance

Cartons measure 78 x 22 x 15cm at roughly 5.8kg gross with moulded foam inserts, palletised 60 sets per Euro pallet for container loading. Each unit is cycled on the test bench and the foot sensor is calibrated before packing. We hold spare struts, sensors and control units in stock so warranty replacement does not wait for a production run, and MOQ starts at one set for sample evaluation.

Nissan Juke F16 2019-2024 Hands-Free Electric Power Tailgate Kit with Kick Sensor

Nissan Juke F16 2019-2024 Hands-Free Electric Power Tailgate Kit with Kick Sensor

Send An Inquiry

Get A Quick Quote