For Mitsubishi Delica D5 Power Tailgate Lift Kit Electric Tailgate Retrofit Kit with Upper Latch Suction Lock and Adjustable Maximum Opening Height for Non-Destructive Installation
electric tailgate retrofit kit
,upper latch soft close liftgate
,smart height memory tailgate
Basic Properties
Trading Properties
Retrofitting a power hatch on a Mitsubishi Delica D5 used to mean cutting the factory loom and accepting a rattling aftermarket bracket. The KMYX937 retrofit kit takes the opposite approach. It keeps the original body structure untouched, uses an upper latch suction lock that mirrors the genuine part layout, and drives the panel with two matched electric struts controlled by a single ECU. The owner gains a door that opens and closes on command, closes with a controlled soft latch pull, and returns to manual operation without drag if the power system is switched off.
The kit is built for the 2008+ Mitsubishi Delica D5, so the strut stroke, the upper latch mounting face and the harness routing are all positioned for that body shell.
- Upper latch suction lock: the genuine-position latch motor draws the tailgate into the seal electrically, eliminating the half-closed door that plagues manual hatches on uneven ground.
- Intelligent speed ramps: soft start and controlled deceleration reduce the mechanical shock at both ends of the stroke and extend actuator service life.
- Fault self-diagnosis: the ECU cuts drive on low voltage or overcurrent events and restores operation automatically once the condition clears.
- Programmable opening height: the owner stores a ceiling-safe stop position with a two-second button hold, useful in low garages and multi-storey car parks.
- Hands-free release option: a kick sensor under the rear bumper allows the door to open when both hands are full.

- Remove the original gas struts and fit the two electric actuators on the existing ball studs.
- Replace the factory latch with the upper suction lock and connect the pre-terminated plug.
- Route the sealed harness along the factory path and mount the ECU behind the rear trim panel.
- Connect the cabin switch and kick sensor, then run the learn cycle to register the open and closed limits.

| Compatible vehicles | Mitsubishi Delica D5, model years 2008+ |
|---|---|
| Model reference | KMYX937 |
| Lock type | Upper latch suction lock |
| Actuator set | Two electric struts, Hall sensor feedback, gold finish |
| Controller | ECU control box, sealed plug-and-play harness |
| Input voltage | 12V DC nominal, protection from 9V to 16V |
| Operating inputs | Remote key, cabin switch, tailgate button, optional kick sensor |
| Protection features | Anti-pinch, overcurrent cut-off, low voltage alarm, automatic recovery |
| Memory function | Adjustable maximum opening height |
| Compliance | RoHS, E-mark E24 |
| Service coverage | 12 month warranty, spare struts and latches available separately |
Family MPV owners in Japan, Southeast Asia, the Middle East and Latin America use the Mitsubishi Delica D5 as a daily shuttle, which makes the hatch the most frequently used panel on the vehicle. The retrofit suits parents loading strollers, drivers moving tools and equipment, and exporters who specify accessory packages on used vehicles before shipment. Distributors serving Mitsubishi specialists can stock the kit as a single reference number that covers both Delica D5 body variants of the same generation.

Each order is packed as a complete kit: two electric actuators, one upper suction lock, one ECU control unit, harness, brackets, fasteners and a fitting guide. Sets are boxed individually and consolidated four to a carton with protective dividers for export handling. Factory testing covers a full open and close cycle run plus latch pull verification on every unit before packing, and the batch test record is available on request. Stock orders leave 7–10 working days after payment, production orders 10–15 days, with air and sea freight options quoted against the destination port.
