Automatic Electric Tailgate Lift Upgrade Car Trunk For Toyota Tank Roomy Daihatsu Thor with Remote Control

Automatic Electric Tailgate Lift Description:

The tailgate/trunk can typically be opened and closed using buttons located on the key fob, the dashboard, or directly on the tailgate/trunk itself. Some systems also offer hands-free operation, where a gentle kick or wave under the rear bumper can trigger the opening or closing.

Electric tailgate/trunk lift systems provide enhanced convenience, accessibility, and safety compared to manual operation. They are commonly found on modern SUVs, minivans, and hatchbacks.

Accessory:

• Motor: The motor uses imported components, and equipped with high precision planetary reducer, it has the characteristics of strong power, long life and low noise.

• Screw: 304 Stainless steel screw, high strength, corrosion resistance and high transmission efficiency.

• Load-bearing Spring: We use the importes material, reduce the loss of long-term compression and frequent compression values, high and low temperature resistance, longer service life.

• Harness: Standard car grade copper wire, ensure stable power supply performance.

• Electric Struts: Double lever intelligent double Hall automatic pivot adjustment protection. Combined with the controller, it can achieve high learning settings, anti-pinch and other functions, achieve comfortable and smooth opening and closing.

• Electric Suction Lock: When closing the door, the tailgate is automatically pulled and closed by the electric suction lock. Reduce closed gravity. The tailgate locking actuator is driven directly by the intelligent electric tailgate controller, and provide tailgate unlocking status information.

• Control Box (ECU): Design expert with 20 years of industrial product background. Use Vehicle-level master chip, built-in intelligent learning algorithm to ensure the safety of the electric tailgate operation, anti-pinch and other functions

• Electric Current: Use Vehicle-level master chip, after the car is locked, the overall standby current of the control box is <1mA, which will not consume the original car battery.

Question & Answer:

Package & Shipping

Note:

Installation Precautions of Electric Tail gate Lifters

• 1. To ensure safety and normal usage of our products, please let the professional staff to stall; To avoid damaging the machine or causing accidents, please do not dismantle the products.

• 2.To start the engine before installation, check the car dashboard display function, whether the buttons operate normally, whether there is any scratches on car interior and surface.

• 3.Check whether the tailgate can normally open or close or not, check if there is any problem with the lights.

• 4.Turn off the engine, preparing tools.

• 5.For installation personnel: Please remove metal objects and any other hard objects to prevent car damage during the installation process.

• 6.Remove automotive components and place them carefully to avoid scratching the dashboard; wiring debris need to be tidied up in time, do not leave them in the car; Joints must be well insulated to prevent short circuits.

• 7.According to our wiring way, to avoid affect the car moving parts, such as steering column, the accelerator and brake pedals, etc., each harness should fixed after wiring , to avoid getting loose.

• 8.Connect each harness according to our wiring way (pay attention to the position of ground wire)

• 9.Do not change the wires or accessories with the power on.