|
Product Details:
Payment & Shipping Terms:
|
| Car Model: | Toyota Avanza 1.5 Luxury Veloz | Year: | 2014-2015 / 2020+ |
|---|---|---|---|
| Function: | Remote Control, Set The Height, Automatic And So On | Package Size: | 80*23*15cm |
| Warranty: | 1 Year | ECU Color: | Gold |
| Lock Type: | Upper Suction Lock | Material: | Metal And Plastic |
| Rated Voltage: | 12V | Operating Voltage: | 9-16V |
| Highlight: | power hatch lift kit,tailgate lift kit,Toyota Avanza Smart Liftgate |
||
Electric smart power tail gate is the electric device usually loaded on the basis of the traditional trunk,control the opening of the trunk by a button or a remote control in the car.
The function of automobile electric tail door has been replaced by years of technology, and has many different types of customers need came out, at present it has two types of electric power tail gate lifter,
One is Single pole, another one is Double Pole, there are also has two kinds of extension functions, one foot kick and an electric lock.
|
Single Pole Power tailgate lifter: The single pole is the first generation of electric tails,The opening of the door is controlled by an electrical signal instruction issued by a vehicle button.
Advantage:It takes only one bar and a simple signal receiver,its operating cost is very low,It can be installed at a very low price.
Disadvantage:Because it is a single rod support,The tail gate only receives electricity from an electric rod.Lead to an overall imbalance of force,No matter what good material is used for the tail gate,
To varying degrees of deformation in long term use,Influence the beauty of vehicles ,Such as deformation, hinges failure, etc |
|
Double Pole Power tailgate lifter: The double rod is based on the optimization of the single rod device,Compared with single pole,The hidden danger of the force balance of the tail gate will not exist,because it's a bar,The synchronization rate for two poles is also required,So the price is much higher than the single pole,The single rod is very applicable to the lighter type of the tail door.The heavy tails of the SUV, such as the car, need to apply the double lever to get the best products experience! |
|
Kick the electric tail door with one foot: The one foot kick is the inductive opening and closing function of the tail door,First, the vehicle needs to have a keyless entry into the system,When the key appears in the keyless induction range,That is, the owner of the key is close to the car.The tail gate induction area will begin to work,When the foot appears in the induction area, the trigger is triggered, when the Tail door opening,Save the steps of the hand on the remote control,In the absence of hands,And it looks very fashion. |
|
Electric lock electric tail door: The traditional electric tail door is very noise when it closes,Many car owners are very distressed ,For fear of the car smashed ,To solve this problem ,The electric lock was invented,Its role is to start at the end of the door,Slow and steady to shut the door.The realization of silence and opening and closing |
The convenience of the electric tail door is unquestionable,When the owner is not tall enough,The hand can't reach the SUV's tail,Or the tail is too heavy ,It's hard to push out, Only lightly press the button ,The trunk can be opened easily,Electric tail gate has intelligent anti clamp,High memory and other functions, A combination of the above advantages,This is really a very useful device.
When the motor is not working, the resistance of the screw rod, the resistance of the motor gear box, the spring force and the gravity of the door form a balance torque to keep the door hovering at any position.
When the motor is working, the motor torque breaks the balance. According to the motor torque direction, the strut performs telescopic movement to drive the door to open and close.
Low noise, stable and reliable. Combined with the controller, the height and anti-pinch functions can be set, and the installation is simple.
Intelligent double Hall automatic fulcrum has adjustment protection to achieve comfortable and smooth door opening and closing.
In the design stage, the arrangement plan of the strut is proposed, and the arrangement of the strut is checked and analyzed. Optimize the design of the tailgate system's high temperature, low temperature, normal temperature opening and closing force characteristics, balance angle characteristics, elastic characteristics of the built-in spring, positive and negative slope environment and other factors, and output the design verification.
Contact Person: Miss. Cynthia Deng
Tel: 13790160972
Fax: 86-0769-82198610
