Product Details:
Payment & Shipping Terms:
|
Application: | Nissan Murano | Year: | 2015+ |
---|---|---|---|
Accessory: | Pole, Holzer Line, Motor, Control Adapter, 3M Glue | Material: | Iron / Plastic / Metal |
Rated Voltage: | 12V | Lock Type: | Upper Suction Lock |
Warranty: | 1 Year | ECU Color: | Glod/Black |
Highlight: | power hatch lift kit,tailgate lift kit,Nissan Murano Hands Free Smart Liftgate |
Electric smart power tail gate is the electric device usually loaded on the basis of the traditional trunk,control the opening of the trunk by a button or a remote control in the car. |
The function of automobile electric tail door has been replaced by years of technology, and has many different types of customers need came out, at present it has two types of electric power tail gate lifter, |
One is Single pole, another one is Double Pole, there are also has two kinds of extension functions, one foot kick and an electric lock. |
The single pole is the first generation of electric tails,The opening of the door is controlled by an electrical signal instruction issued by a vehicle button.
Advantage:It takes only one bar and a simple signal receiver,its operating cost is very low,It can be installed at a very low price
Disadvantage:Because it is a single rod support,The tail gate only receives electricity from an electric rod.Lead to an overall imbalance of force,No matter what good material is used for the tail gate,
To varying degrees of deformation in long term use,Influence the beauty of vehicles ,Such as deformation, hinges failure, etc
The double rod is based on the optimization of the single rod device,Compared with single pole,The hidden danger of the force balance of the tail gate will not exist,because it's a bar,The synchronization rate for two poles is also required,So the price is much higher than the single pole,The single rod is very applicable to the lighter type of the tail door.The heavy tails of the SUV, such as the car, need to apply the double lever to get the best products experience!
The one foot kick is the inductive opening and closing function of the tail door,First, the vehicle needs to have a keyless entry into the system,When the key appears in the keyless induction range,That is, the owner of the key is close to the car.The tail gate induction area will begin to work,When the foot appears in the induction area, the trigger is triggered, when the Tail door opening,Save the steps of the hand on the remote control,In the absence of hands,And it looks very fashion.
The traditional electric tail door is very noise when it closes,Many car owners are very distressed ,For fear of the car smashed ,To solve this problem ,The electric lock was invented,Its role is to start at the end of the door,Slow and steady to shut the door.The realization of silence and opening and closing
The convenience of the electric tail door is unquestionable,When the owner is not tall enough,The hand can't reach the SUV's tail,Or the tail is too heavy ,It's hard to push out, Only lightly press the button ,The trunk can be opened easily,Electric tail gate has intelligent anti clamp,High memory and other functions, A combination of the above advantages,This is really a very useful device.
The mechanical strength has passed the national compulsory 3C certification, and the reliability is guaranteed. The main components are purchased from the OEM supply chain, which is more stable. The service life has been actually tested by many customers to meet the requirements of the car factory. If the electric suction function is not normal, the tailgate can also be unlocked manually.
When the tailgate is about to close, the strut can rely on the electric suction function to achieve the closing action without accelerating and afterburning, and the effect is very good.
There are several ways to open an electric tailgate, depending on the specific vehicle and its features. Here are some common methods:
Key Fob: Many vehicles with electric tailgates include a dedicated button on the key fob. Pressing the corresponding button on the key fob will activate the tailgate, causing it to open or close automatically.
Front Button: Inside the vehicle, there is typically an interior control panel, often located on the driver's side door or center console. This panel will have a dedicated button or switch specifically for opening and closing the tailgate. Pressing the button or activating the switch will trigger the automatic operation of the tailgate.
Rear Button: Some vehicles have an exterior button or touchpad located near the tailgate itself. Pressing this button will initiate the opening or closing of the tailgate. This is useful when approaching the vehicle from the rear and you want to open the tailgate without entering the vehicle.
Foot Gesture/Sensor: Certain electric tailgates offer hands-free operation using sensor-based systems. These systems detect foot gestures or movements under the rear bumper or designated area. By waving your foot or performing a specific motion, you can trigger the tailgate to open or close without physically touching anything.
Q1. What are your terms of packing?
A: Generally, we pack our goods in carton box, suitable for shipping container.
Q2. What is your terms of payment? A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. How about your delivery time?
A: Generally, it will take 10 to 15 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q4. Can you produce according to the samples?
A: Yes, we can produce by your parameters.
Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the sample fee is required.
Contact Person: Miss. Cynthia Deng
Tel: 13790160972
Fax: 86-0769-82198610