Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
Company News
Dongguan Kaimiao Electronic Technology Co., Ltd
Home News

The Installation of Toyota Land Cruiser

China Dongguan Kaimiao Electronic Technology Co., Ltd certification
China Dongguan Kaimiao Electronic Technology Co., Ltd certification
Hello, Florence. We have tested one tailgate on Hyundai Tucson. We found that the product quality is good

—— Bolkar

they products are the best in the market we have used other company. there back up service is professiona.l

—— Mr. Nolan

I'm Online Chat Now
Company News
The Installation of Toyota Land Cruiser
Latest company news about The Installation of Toyota Land Cruiser

 

Attention

 

1. Before installing the tailgate, check the status of the original tailgate. (Whether the gap in the door is balanced)

 

2. All images in the manual are for reference only. Pictures may not be the same as the real one, but the installation method is the same.

 

3. In order to facilitate your installation, please ca refullyread the product manual before installation. Please pay attention to protect the surface of your car to avoids cratches. Please regularly check all parts connected withthe car for looseness, to ensure the safety of use.

 

4. After the tailgate is installed, must learn settings to openand close the door.

 

5. Raise the tailgate to the top, and then press the tailgate switch button for 3-5 seconds. When you hear a sound"Di——", loose your hand. Finally, press the tailgate switch button again, you will hear "DiDi——" when the door was closed. Setting finished. If you don't have hear"DiDi——", setting is not succeed and you need to set again.

 

Installation Instruction

 

1. Remove the original trim and struts.

 

latest company news about The Installation of Toyota Land Cruiser  0

 

2. Replace the ball under the original car, install our ball head and our strut.

 

latest company news about The Installation of Toyota Land Cruiser  1

 

3. Remove the left upper bracket of the original car, install the left upper bracket, and fix it with our screws.

 

latest company news about The Installation of Toyota Land Cruiser  2

 

4. Left brace Hall line alignment.

 

latest company news about The Installation of Toyota Land Cruiser  3

 

5. Left strut installation completed.

 

latest company news about The Installation of Toyota Land Cruiser  4

 

6. Left strut installation completed.

 

latest company news about The Installation of Toyota Land Cruiser  5

 

7. Remove the upper right bracket of the original car and install the upper right bracket of our company, fix it with our screws.

 

latest company news about The Installation of Toyota Land Cruiser  6

 

8. Strut installation complete diagram.

 

latest company news about The Installation of Toyota Land Cruiser  7

 

9. Hall line goes through the reserved hole to the tailgate.

 

latest company news about The Installation of Toyota Land Cruiser  8

 

10. Under the main drive, remove the plaque and find the power. Unplug the original car 30A

 

fuse and plug in our power plug.

 

latest company news about The Installation of Toyota Land Cruiser  9      latest company news about The Installation of Toyota Land Cruiser  10

 

11. Find the ground wire below the power supply and connect the ground wire.

 

latest company news about The Installation of Toyota Land Cruiser  11

 

12. Remove the plaque at the main driving seat belt B-pillar and find the control.

 

latest company news about The Installation of Toyota Land Cruiser  12

 

13. Our control line connects the white and red lines of this carrier (the first hole in the first row from left to right).

 

latest company news about The Installation of Toyota Land Cruiser  13

 

14. Remove the original car lock and add a spacer.

 

latest company news about The Installation of Toyota Land Cruiser  14

 

15. Remove the screws to remove the original car door lock, install our suction lock, use the original car screws.

 

latest company news about The Installation of Toyota Land Cruiser  15

 

16. As shown in the picture, plug in the power socket.

 

latest company news about The Installation of Toyota Land Cruiser  16

 

17. Pull out the socket at the door lock and insert the pulse cord socket.

 

latest company news about The Installation of Toyota Land Cruiser  17

 

18. Unplug this seat at the door lock and insert the three-way socket of our company, and

insert the other end back into place.

 

latest company news about The Installation of Toyota Land Cruiser  18

 

19. Some models of the old Cool Road Ze (around 13 years), if unlocked, can not be opened,

according to this figure wiring.

 

latest company news about The Installation of Toyota Land Cruiser  19

 

20. Connect the Hall line, central control line and power line to our control box and install the control box at the tailgate.

 

latest company news about The Installation of Toyota Land Cruiser  20

 

21. Control box installation position, fixed with a strap.

 

latest company news about The Installation of Toyota Land Cruiser  21

 

22. Install the tailgate button in the original tailgate trim.

 

latest company news about The Installation of Toyota Land Cruiser  22

 

23. After the power is turned on for the first time, the door is open for the control box.

 

latest company news about The Installation of Toyota Land Cruiser  23

 

24. Automatic learning mode. Please ensure that the door can be turned on and off.

 

latest company news about The Installation of Toyota Land Cruiser  24

Pub Time : 2018-04-14 09:31:43 >> News list
Contact Details
Dongguan Kaimiao Electronic Technology Co., Ltd

Contact Person: Mr. Carroll Chan

Tel: 13532848886

Fax: 86-0769-82198610

Send your inquiry directly to us (0 / 3000)