Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
News
Company News
Dongguan Kaimiao Electronic Technology Co., Ltd
Home News

The Installation of Bisu

China Dongguan Kaimiao Electronic Technology Co., Ltd certification
China Dongguan Kaimiao Electronic Technology Co., Ltd certification
Hello, Florence. We have tested one tailgate on Hyundai Tucson. We found that the product quality is good

—— Bolkar

they products are the best in the market we have used other company. there back up service is professiona.l

—— Mr. Nolan

I'm Online Chat Now
Company News
The Installation of Bisu
Latest company news about The Installation of Bisu

 

Attention

 

1. Before installing the tailgate, check the status of the original tailgate. (Whether the gap in the door is balanced)

 

2. All images in the manual are for reference only. Pictures may not be the same as the real one, but the installation method is the same.

 

3. In order to facilitate your installation, please ca refullyread the product manual before installation. Please pay attention to protect the surface of your car to avoids cratches. Please regularly check all parts connected withthe car for looseness, to ensure the safety of use.

 

4. After the tailgate is installed, must learn settings to openand close the door.

 

5. Raise the tailgate to the top, and then press the tailgate switch button for 3-5 seconds. When you hear a sound"Di——", loose your hand. Finally, press the tailgate switch button again, you will hear "DiDi——" when the door was closed. Setting finished. If you don't have hear"DiDi——", setting is not succeed and you need to set again.

 

Installation Instruction

 

1.Remove the screws before removing the black cover.

 

latest company news about The Installation of Bisu  0

 

2.Install our company's left upper ball head (the same steps on the left and right sides).

 

latest company news about The Installation of Bisu  1

 

3.Install our company's left lower bracket and struts (same left and right steps).

 

latest company news about The Installation of Bisu  2

 

4. Pass the Hall line through the reserved hole on the left and right sides, and insert the rubber plug.

 

latest company news about The Installation of Bisu  3

 

5.Electric pole installation complete diagram.

 

latest company news about The Installation of Bisu  4

 

6.Holzer cable through the reserved hole and walk to the lock position as shown in the figure.

 

latest company news about The Installation of Bisu  5

 

7.As shown in the picture, remove the cover of the main driving door and remove the screws.

 

latest company news about The Installation of Bisu  6

 

8.As shown in the figure, remove the cover of the door handle and remove the screws to remove the door.

 

latest company news about The Installation of Bisu  7

 

9.After removing the door plaque, the central control line connects the yellow and white lines.

 

latest company news about The Installation of Bisu  8

 

10.The control cable passes through the carriage from the door.

 

latest company news about The Installation of Bisu  9

 

11.Drive power under main drive.

 

latest company news about The Installation of Bisu  10

 

12.The main driver side to find the ground. Ground connection.

 

latest company news about The Installation of Bisu  11

 

13.The central control box is installed in the position shown in the picture, and it is fixed with our washers and screws. The Hall line and the power line are inserted one by one.

 

latest company news about The Installation of Bisu  12

 

14.Connect the original vehicle unlocking plug with the three-way adapter socket provided by our company. The plug at the other end of our company is inserted into the lock position.Punches holes in the removed tailgate and installs our tailgate button.

 

latest company news about The Installation of Bisu  13

 

15.After the installation is complete, you must set the tailgate learning. Make sure that the door can be turned on and off.

 

latest company news about The Installation of Bisu  14

 

 

Pub Time : 2018-04-17 09:34:02 >> News list
Contact Details
Dongguan Kaimiao Electronic Technology Co., Ltd

Contact Person: Mr. Carroll Chan

Tel: 13532848886

Fax: 86-0769-82198610

Send your inquiry directly to us (0 / 3000)